Programiranje Yaesu FTH-2070

[supermicro45]

Zdravo,

Zanima me , če kdo pozna koga ki v Sloveniji programira radijske postaje Yaesu FTH-2070.
Postaja je po informacijah trenutno sprogramirana na frekvence ki jih je vojska rabila za sebe.
Če ima kdo kakšen nasvet bom zelo hvaležen.

[alividmar]

You'll need a SLOW computer to run the programming software, and real DOS. Don't even think about running it on some dual core box. An old 486 laptop with a real serial port does the trick every time. The OEM programming RIB/cable is expensive and hard to find, but building a simple CAT interface is easy, and sacrificing an MH-20 speaker mike to get the connector may have to do.

VIR

Looks like the same software is used for FTH-2070/FTH-2008/7008/2009/7009/VX-500-Vhf-Uhf/FTL-1011/2011/7011-4/1/24/99 channel

Probably CE5.exe or CE7.exe not sure which versions. It's a dos program. Usually the interface is RS-232.

VIR

Priponka s programi je vzeta TUKAJ Med njimi je 2070.exe .

Čisto na koncu te strani pa so sheme za kable. (priponka 2, 3)

[VolkD]

Kontaktiraj S51KM